Part Number Hot Search : 
MIP0226 PE3908LF MCP41100 DO1605T 259410 WJ101 MBT3906 IRF730
Product Description
Full Text Search
 

To Download MX128 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 FX/MX128
CML Microcircuits
COMMUNICATION SEMICONDUCTORS
D/128/2 January 2003
Audio Band Scrambler
Provisional Information
Features
* * * * * * * Full-Duplex Audio Processing On-Chip Filters Carrier Rejection >55dB Uses IF (10.24 MHz) Clock Excellent Audio Quality Low Power Operation (3.0V) Battery Powered Portability
Applications
* * * * Cordless Telephones Wireless PBX Two-Way Radio Leisure Radio (FRS, GMRS, MURS, PMR446)
1.1 Brief Description The FX/MX128 is a full-duplex frequency inversion scrambler designed to provide secure conversations. The Rx and Tx audio paths consist of the following: 1. A switched-capacitor balanced modulator with high baseband and carrier rejection. 2. A 3.3 kHz inversion carrier (injection tone). 3. A 3100 Hz lowpass filter. 4. Input op-amps with externally adjustable gain. The FX/MX128 uses mixed signal CMOS switched-capacitor filter technology and operates from a single supply in the range of 3.0 to 5.5 volts. The inversion carrier's frequency and filter switching clock are generated on-chip using an external 10.24 MHz or 3.58/3.6864 MHz crystal or clock input (selectable). This device is available in the following package styles: 16-pin SOIC,TSSOP and PDIP.
(c) 2003 CML Microsystems Plc
Audio Band Scrambler
FX/MX128
CONTENTS
Section 1.2 1.3 1.4 1.5 1.6 1.7 Page
Block Diagram.......................................................................................................... 3 Signal List................................................................................................................. 4 External Components.............................................................................................. 5 Application ............................................................................................................... 6 Application Notes .................................................................................................... 6 Performance Specification...................................................................................... 7
1.7.1 1.7.2 Electrical Performance ..............................................................................................7 Packaging ...............................................................................................................10
(c) 2003 CML Microsystems Plc
2
D/128/2
Audio Band Scrambler
FX/MX128
1.2
Block Diagram
Figure 1: Block Diagram
(c) 2003 CML Microsystems Plc
3
D/128/2
Audio Band Scrambler
FX/MX128
1.3
Pin No. 1 2 3 4 5
Signal List
Signal Name XTALN XTAL/CLOCK TXOUT TX GAIN AMP OUT TXIN VSS VBIAS RXIN RX GAIN AMP OUT RXOUT CLR CLOCK SELECT VDD I/P O/P N/C = = = Type O/P I/P N/C O/P O/P Description
All Packages
6 7 8 9 10 11 12 13 14 15 16 Notes:
I/P N/C Power O/P N/C I/P O/P O/P I/P I/P Power Input Output
This is the output of the clock oscillator inverter. 10.24 MHz, 3.58/3.6864 MHz, or an externally derived clock is injected at this pin. See Figure 1. No connection should be made to this pin. This is the analogue output of the transmit channel. It is internally biased at VDD/2. This is the output pin of the transmit channel gain adjusting opamp. See Figure 3 for gain setting components. This is the analogue signal input to the transmit channel. This input goes to a gain adjusting op-amp whose gain is set by external components. See Figure 3. No connection should be made to this pin. Negative supply (GND) This is an internally generated bias voltage output (VDD/2). It should NOT be decoupled with a capacitor. No connection should be made to this pin. This is the analogue signal input to the receive channel. This input goes to a gain adjusting op-amp whose gain is set by external components. See Figure 3. This is the output pin of the receive channel gain adjusting opamp. See Figure 3 for gain setting components. This is the analogue output of the receive channel. It is internally biased at VDD/2. A logic 1 on this input selects the invert mode. A logic 0 selects the clear (not inverted) mode. Selects either 10.24 or 3.58/3.6864 MHz clock frequency. A logic "1" selects 10.24 MHz, and a logic "0" selects 3.58/3.6864 MHz. This input is internally pulled high. Positive supply of 3.0V to 5.5 V
No Connection
(c) 2003 CML Microsystems Plc
4
D/128/2
Audio Band Scrambler
FX/MX128
1.4
External Components
Components X1 R1 C1 C2 C3
Value 10.24MHz 1.0M 0.47F 22.0pF 22.0pF
Value 3.58/3.6864 MHz 1.0M 0.47F 33.0pF 47.0pF
Note: Xtal circuitry shown is in accordance with CML's Xtal Application Note.
Figure 2: Recommended External Components
(c) 2003 CML Microsystems Plc
5
D/128/2
Audio Band Scrambler
FX/MX128
1.5
Application
Figure 3: Block Diagram of a Typical Application of the FX/MX128 (Cordless Phone)
1.6
Application Notes
Carrier Frequency Upper Cutoff Frequency Lower Cutoff Frequency = = = (3.2995kHz / 10.24MHz) * XTAL frequency (2.800kHz / 10.24MHz) * XTAL frequency (400Hz / 10.24MHz) * XTAL frequency
Formulae for calculating the carrier frequency, upper cutoff frequency and lower cutoff frequency with clock select pin high are as follows:
Formulae for calculating the carrier frequency, upper cutoff frequency and lower cutoff frequency with clock select pin low are as follows: Carrier Frequency Upper Cutoff Frequency Lower Cutoff Frequency = = = (3.2995kHz / 3.415MHz) * XTAL frequency (2.800kHz / 3.415MHz) * XTAL frequency (400Hz / 3.415MHz) * XTAL frequency
(c) 2003 CML Microsystems Plc
6
D/128/2
Audio Band Scrambler
FX/MX128
1.7
Performance Specification
1.7.1 Electrical Performance
Absolute Maximum Ratings Exceeding these maximum ratings can result in damage to the device. General Supply (VDD - VSS) Voltage on any pin to VSS Current in or out VDD and VSS pins Current in or out of any other pin E4/P3/D4 Packages Total Device Dissipation (P3 and D4) at TAMB = 25C ...Derating (P3 and D4) Total Device Dissipation (E4) at TAMB = 25C ...Derating (E4) Storage Temperature Operating Temperature Min. -0.3 -0.3 -30 -20 Min. -- -- -- -- -55 -40 Max. 7.0 VDD + 0.3 +30 +20 Max. 1000 13 400 5.3 +125 +85 Units V V mA mA Units mW mW/C mW mW/C C C
Operating Limits Correct operation of the device outside these limits is not implied. Min. Supply (VDD - VSS) Operating Temperature Clock Frequency 3.0 -40 -- Max. 5.5 +85 10.24 Units V C MHz
(c) 2003 CML Microsystems Plc
7
D/128/2
Audio Band Scrambler
FX/MX128
Operating Characteristics For the following conditions unless otherwise specified: VDD = 3.3V at TAMB = 25C Clock Frequency = 10.24MHz Audio Level 0dB ref. at 1kHz = (VDD-1) x 150mVRMS e.g. VDD = 3.3V 0dB = 345mVRMS. Notes Static Values Supply Current Input Impedance Digital Amplifiers Output Impedance (RXOUT, TXOUT) Input Logic 1 Voltage Input Logic 0 Voltage Dynamic Values General Analogue Signal Input Levels Analogue Output Noise Clear Mode Passband -3dB Cutoff Frequencies Low High Passband Ripple (300-3000Hz) Rx Channel Tx Channel Passband Ripple (500-2750Hz) Rx Channel Tx Channel Filter Attenuation at 3.3 kHz Rx and Tx Channel Filter Attenuation at 3.6 kHz Rx and Tx Channel -- 30 -- dB -- 3000 -- -- 300 -- Hz Hz 4 -16.0 -- -- 2.5 3 5.0 dB mVRMS 1 1 2 2 100 1.0 -- 70% -- -- 10.0 1.0 -- -- -- -- -- -- 30% k M k VDD VDD -- 2.0 3.0 mA Min. Typ. Max Units
0 0
-- --
3.6 2.9
dB dB
0 0
-- --
2.2 2.0
dB dB
--
45
--
dB
(c) 2003 CML Microsystems Plc
8
D/128/2
Audio Band Scrambler
FX/MX128
Notes Passband Gain (@1kHz ref.) Rx and Tx Channel Switched-Capacitor Filter Sampling Carrier Frequency Invert Mode Combined Tx and Rx Response Passband -3dB Cutoff Frequencies Low High Passband Gain Distortion (@1kHz) Passband Gain (@1kHz ref.) Low Frequency Roll-off (<200 Hz) Invert Mode Single Channel Response Unwanted Modulation Products Rx and Tx Channel Carrier Breakthrough Rx and Tx Channel Baseband Breakthrough Rx and Tx Channel Operating Characteristics Notes: 1. Batch sampled only 2. By characterisation only 3. Measured with Input Level 0dB 3 5
Min. -1.5 -- --
Typ. -- 211.066 3298
Max 0.5 -- --
Units dB kHz Hz
-- 2800 -3 -- -2.5 12
-- -- -- 1.75 -1.5 --
400 -- 0.5 2.75 0 --
Hz Hz dB % dB dB/oct.
3 -- 3 -- 3 -- -40 -- dB -55 -- dB -40 -- dB
4. Short circuit Rx or Tx input, measure noise at corresponding analogue output, in 30kHz bandwidth 5. Op Amp gain 0dB 6. Clear mode only
(c) 2003 CML Microsystems Plc
9
D/128/2
Audio Band Scrambler
FX/MX128
1.7.2 Packaging
Figure 4: 16-pin SOIC Mechanical Outline: Order as part no. FX128D4 or MX128DW
Figure 5: 16-pin PDIP Mechanical Outline: Order as part no. FX128P3 or MX128P
(c) 2003 CML Microsystems Plc
10
D/128/2
Audio Band Scrambler
FX/MX128
Figure 6: 16-pin TSSOP Mechanical Outline: Order as part no. FX128E4 or MX128E4
Handling precautions: This product includes input protection, however, precautions should be taken to prevent device damage from electro-static discharge. CML does not assume any responsibility for the use of any circuitry described. No IPR or circuit patent licences are implied. CML reserves the right at any time without notice to change the said circuitry and this product specification. CML has a policy of testing every product shipped using calibrated test equipment to ensure compliance with this product specification. Specific testing of all circuit parameters is not necessarily performed.
www.cmlmicro.com
For FAQs see: www.cmlmicro.com/products/faqs/ For a full data sheet listing see: www.cmlmicro.com/products/datasheets/download.htm For detailed application notes: www.cmlmicro.com/products/applications/
Oval Park, Langford, Maldon, Essex, CM9 6WG - England.
4800 Bethania Station Road, Winston-Salem, NC 27105 - USA.
No 2 Kallang Pudding Road, #09 to 05/06 Mactech Industrial Building, Singapore 349307
No. 218, Tian Mu Road West, Tower 1, Unit 1008, Shanghai Kerry Everbright City, Zhabei, Shanghai 200070, China. Tel: +86 21 6317 4107 +86 21 6317 8916 Fax: +86 21 6317 0243 Sales: cn.sales@cmlmicro.com.cn Technical Support: sg.techsupport@cmlmicro.com
Tel: +44 (0)1621 875500 Fax: +44 (0)1621 875600 Sales: sales@cmlmicro.com Technical Support: techsupport@cmlmicro.com
Tel: +1 336 744 5050, 800 638 5577 Fax: +1 336 744 5054 Sales: us.sales@cmlmicro.com Technical Support: us.techsupport@cmlmicro.com
Tel: +65 6745 0426 Fax: +65 6745 2917 Sales: sg.sales@cmlmicro.com Technical Support: sg.techsupport@cmlmicro.com


▲Up To Search▲   

 
Price & Availability of MX128

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X